Autumn Inspiration Wall Hanging

By  Lois Winston  for  The DMC Corporation

stitch count: 85w x 133h; finished stitching size: 6-5/8"x10-3/8"

  • Autumn Inspiration Wall Hanging


  • 25-count Evenweave (DMC), 12”x18”
  • 6-strand Embroidery Floss in colors listed on chart (DMC)
  • Iron-on interfacing, 11”x17”
  • Lining fabric, 9”x14-1/2”
  • Bell pull hardware


  • Tapestry needle (DMC), #24
  • Sewing needle and matching thread
  • Iron and pressing board

Pattern - Autumn Inspiration Wall Hanging

  • 1. Fold Evenweave in half and in half again opposite way to find center. Mark center with contrasting thread.
  • 2. Using two strands of floss and working over two threads, cross-stitch design centered on Evenweave.
  • 3. Use one strand 918 to backstitch lettering, and one strand 938 for remaining backstitching and French knot.
  • 4. Follow manufacturer's instructions to apply interfacing to wrong side of stitching. Trim 1-1/8" from stitching along sides and bottom and 3" from stitching at top.
  • 5. With wrong sides together, sew evenweave to lining fabric along sides and bottom edges. Turn right side out. Press top raw edges under 1/4". Tack open edge closed.
  • 6. Fold top edge under 1-1/4". Stitch 1" from folded edge to create casing for bell pull hardware.
  • Note
  • 1. Use 1/4" seam allowance throughout.