Potted Baseball Player
Fill this Potted Baseball Player's head with gift cards or treats and you'll have the perfect coach's gift! Or, use this fun little guy to hold silverware at your next baseball party.
Potted Baseball Player
- Terra cotta items: 8” pots, two; 10” saucer
- DecoArt Patio Paints: Geranium Red, Cloud White, Antique Mum, Sprout Green, Wrought Iron Black, Pinecone Brown, Citrus Green
- Black craft foam, 2mm, 9”x12” sheet
- Robert Simmons Expression by Daler-Rowney Paintbrushes: size 8 flat shader; sizes 12, 5, 3 pointed round; size 0 liner; sponge brush
- Painter’s tape, 1”-wide
- Beacon Adhesives Kids Choice! Glue
- paper, pencil, scissors, ruler, paper plate (for palette), paper towels, transparent tape, transfer paper, newspaper (to cover work surface)
Pattern - Potted Baseball Player
- 1. Print and cut out patterns. Follow directions on patterns. (Note: Apply two and possibly three coats of paint to each surface, allowing paint to dry between coats.) For base, turn saucer upside down; use sponge brush and Sprout Green to paint bottom and outside surface of saucer on covered work surface. Use Cloud White to paint bottom and outside surface of one pot (body) and rim of other pot. For head, use Antique Mum to paint remaining portion of pot with white rim.
- 2. Paint the base by applying two coats of Citrus Green to saucer rim and rim ledge; allow paint to dry between coats. For grass blades, fill or load liner brush with Citrus Green; starting at rim ledge, pull brush up and away from rim. Continue to paint grass blades around entire saucer, applying strokes in different directions and overlapping into each other.
- 3. For body, turn white pot upside down on work surface. To create shirt stripes, apply painter's tape vertically to body, spacing each piece approximately 1/2" apart; use pencil to lightly trace along edges. For shoes, place transfer paper between pattern and rim of pot; trace pattern onto rim so bottom edges are aligned. In same manner, transfer arm pattern onto body so arms are centered to shoes and aligned with top edge of body.
- 4. To paint the body, see photo. (Note: Apply two coats of paint as needed, allowing paint to dry between coats.) Paint Pinecone Brown mitt, Antique Mum hands, Cloud White baseball, and Wrought Iron Black shoes. Use Geranium Red and shader brush to paint stripes on shirt and sleeves; use liner brush to apply curve lines on baseball. Use Wrought Iron Black and liner brush to outline sleeves, hands, mitt, and baseball; apply stitch lines on baseball curve lines. Use Geranium Red and shader brush to paint a collar line around top of shirt as shown.
- 5. To paint head, see photo. For face, place transfer paper between pattern and side of pot; trace pattern onto pot. To paint hair, turn pot upside down. In same manner as grass, fill or load liner brush with Pinecone Brown; starting at rim ledge, pull brush up and away from rim. Continue to paint hair strands around entire pot applying strokes in different directions and overlapping into each other. Let dry. Turn pot right side up. Paint eyes Cloud White. Use Wrought Iron Black to paint pupils and inner mouth. Let dry. Use Geranium Red to paint nose and tongue. For cheeks, load #12 round brush with Geranium Red and tap brush straight up and down a few times on paper towel to work paint into bristles; gently tap brush to each end of smile. Use Cloud White and liner brush to highlight dot eyes, cheeks, and nose. Use Wrought Iron Black and liner brush to outline eyes, nose, smile, and chin line.
- 6. To assemble, turn head pot upside down. See photo. Place hat brim on pot ledge, centering brim to face; use pencil to mark ends of brim on pot. Remove brim. Apply glue to pot ledge between pencil marks; allow glue to set for a minute or two. Adhere brim in place. Let dry. Turn head right side up. Apply glue along bottom edge of body; adhere bottom of body to top of base. Apply glue to top of body; adhere bottom of head to top of body.