Pedestal Candy Jars

By  Roxi Phillips  for  Krylon

size: varies

  • Pedestal Candy Jars


  • Metal candlesticks, three, in a variety of heights and styles
  • Glass jars with flat bottoms and lids


  • Krylon Dual Hammered Finish in Bronze
  • Two-part epoxy

Basic Supplies

  • masking tape, newspaper (to cover work surface)
  • 1. Thoroughly clean and dry jars, lids, and candlesticks.
  • 2. Mask seals on lids with tape, if needed.
  • 3. Spray candlesticks and lids with coats of Dual Hammered Finish in Bronze, repeating coats if necessary, following manufacturer's instructions.
  • 4. Mix two-part epoxy following manufacturer's instructions. Apply epoxy to top of candlestick and adhere glass jar. Allow epoxy to cure completely.
  • 5. Fill jars with candy and cover with lids.
  • Tip
  • 1. Spray candlesticks inside a large cardboard box to prevent paint from spraying on work surface or surrounding area.