Dad’s Mug Rug

By  Sheryl Hastings 

A cup of coffee and donut are perfect for this mug rug. Paired with the newspaper, Dad is all set for Sunday morning!

  • Dad’s Mug Rug
  • Full View


  • Cotton print fabrics: blue (top), 10”x6-1/2”; brown (back and binding), 12”x8-1/2”, 2-3/4”x44”; scraps
  • Interfacing fleece, 12”x8-1/2”


  • Sewing machine and matching thread
  • Adhesives: Therm O Web HeatnBond Lite Iron-On Adhesive, 1/8 yd.; fabric glue

Basic Supplies

  • scissors, pins, needle, pencil, cardstock, iron and pressing surface, cutting mat, ruler, rotary cutter (optional)

Pattern - Dad's Mug Rug

  • Size
  • 1. Size is 10"x6-1/2".
  • Dad's Mug Rug
  • 1. Print out patterns onto cardstock. Cut out patterns. Trace patterns onto paper side of fusible webbing. Follow manufacturer's instructions to fuse wrong side of fabric scraps onto iron-on adhesive. Cut out fused appliqué pieces on traced lines; remove paper backing.
  • 2. With right side of blue front piece facing up, arrange appliqué pieces using photo as guide. (Note: It is important to remember that binding will take 3/8" of space along each edge.) Position appliqués 3/4" from each edge with adhesive side of appliqué facing fabric. Fuse in place using iron.
  • 3. Center front piece, with right side facing up, on top of fleece interfacing. Baste stitch in place using needle and thread.
  • 4. Machine-sew around edges of each appliqué piece using matching thread, stitching through top and fleece. Remove basting stitches. Apply fabric glue onto back side of stitching to secure ends.
  • 5. Position brown back piece, with wrong side facing up, on work surface. Center appliquéd/fleece top piece on back piece. Baste stitch in place using needle and thread. Use rotary cutter to cut fleece and backing pieces same size as top piece.
  • 6. Fold brown binding strip in half lengthwise; press. Fold one end under 1/4" to wrong side; press. Fold back up and press end again. Beginning on center front along bottom edge of mug rug, and using edge ironed in at 1/4", pin binding to mug rug with raw edges of binding even with raw edges of mug rug. Machine-sew in place using 3/8" seam allowance, beginning at folded end of binding and stopping 3/8" from corner. Remove from machine.
  • 7. Flip binding piece down, forming fold at 45º angle. Bring binding back down so fold in binding is even with raw edge on bottom. (Note: Raw edges of binding should be even with raw edges of mug rug.) Secure with pins; machine-sew in place as before, stopping 3/8" from end. Repeat process to sew remaining corners.
  • 8. Trim excess threads and remove basting stitches. Flip folded edges of binding to back of mug rug; pin in place. Hand-sew binding to backing. Knot ends.
  • Tip
  • 1. Interfacing fleece is easiest to use when you machine appliqué. It is smoother than polyester batting and shifts less often.