Primitive Halloween Luminaries
size: 6” tall
- Large recycled tin cans, 6”, two
- Craft Catalog: Acacia & Stripes Rusty Tin Tile (G248056), Rusty Tin Wire (G247191)
- Mini pewter brads, 14
- Tea-light or votive candle
newspaper (to cover work surface)
- DecoArt Americana Acrylic Paints: Antique Gold, Antique Green, Burnt Orange, Milk Chocolate, Royal Purple
- DecoArt Multi-Purpose Sealer
- Royal & Langnickel Paintbrushes: Series 985 Angular White Bristle 1”, Series 425 Flat Bristle #10, Series 150 Shader #2
- Adhesive remover
- Hammer and nail
- Scrap wood block
- Sharp metal-cutting scissors
- Coarse-grit sandpaper
- 1. Wash and dry can using adhesive remover; sand outside. Fill can two-thirds full with water and freeze. Remove can from freezer; place on side in sink. Use hammer and nail to punch random holes around sides. Let ice melt; dry can.
- 2. Use 1” brush to apply one coat sealer on outside of can; let dry. Apply two coats Antique Green. Use flat brush to drybrush inside and outside of can Milk Chocolate. Sand outside of can to create distressed look.
- 3. Print out patterns. Cut seven pumpkins from tin tile. Place each shape on scrap wood and punch hole through center using hammer and nail. Bend edges for added dimension.
- 4. Use flat brush to apply two coats Burnt Orange onto front of pumpkins. Sand pumpkins to create distressed look. Use brads to randomly attach pumpkins into holes in can. Wrap wire several times around can; twist ends together. Insert candle.
- 1. Repeat Steps 1-4 above, painting can Royal Purple and star cut-outs Antique Gold.
- 1. Use a texture sheet and hammer to create impressions on tin tile.
by Mary Ayres